Trigger Operation; Menu Operation - ITech IT6121B User Manual

Recall operation
Recall
7 Press
numeric key

3.8 Trigger operation

You need to select the trigger mode from the menu before using this function.
Details refer to TRIG item in the system menu.
If the trigger source is selected to "Manual", after you edit a list file, press
(Shift)+
Enter

3.9 Menu Operation

3.9.1 Menu description
Press
will be displayed on the VFD. Use up and down keys to scroll through the menu list
and press
return to the higher level menu and to return to the main operating mode.
MENU
Config CONFIG MENU
Initialize
Memory
Out_Recal
Set_Recall
Buzzer
Knob
(then the key is lit) , and then press
Enter
（Trigger）to give a trigger signal. During the running process
button will flash all the time.
I-set I-set
(Shift) + (Menu) to enter menu mode. The menu parameters
Enter
to select a menu and view the parameters. Press
Reset config?
No
Yes
Memory GROUP SET
group=0（0~9）
OUT RECALL
On
Off(default)
SET RECALL
On(default)
Off
KEY BUZZER
On
Off(default)
KNOB LOCK
Copyright © ITECH Electronics Co., Ltd.
Select whether to reset the config menu
Memory group set for save/recall
function
Set the Power ON/OFF state after
power up.
"Remembers" and restores the Power
ON/OFF state of the power supply
before power was turned off
Disable this function.
Recall operating parameters of power
supply after power up
"Remembers" and restores the
operating parameters of the power
supply (voltage, current settings..)
before power was turned off.
Disable this function. The parameters
are the default set when power up.
Keypad sound setting
Enable key sound
Disable key sound
Enable/disable the rotary knob.
Basic operation
ESC
to
18