ITech IT6322A User Manual page 25

CH2
CH3
Power Combine Set...
Comb
Off
Series
Parallel
Track
Exit Exit the system menu
Out State
This parameter sets the output On/Off state at power up. If you select
"Keep", the power supply will save the output state prior to power down and
revert to that state at power up. If you select "Off", the output state is always
Out timer
Exit
System Menu...
Max Volt
Out Timer
Exit
System Menu...
Max Volt
Out timer
Exit
Series Choose...
CH1+CH2
Parallel Choose...
CH1+CH2
CH2+CH3
ALL
Track Choose...
CH1+CH2
CH2+CH3
ALL
NOTE
In the menu, righ/left arrow keys and rotary knob used for flow around the menu, change the
Enter
options, Used to identify the current menu commands or into the next layer menu.
Esc
Press can exit menu or enter a layer menu.
Copyright © Itech Electronics Co., Ltd.
Function and Features
Out Timer State Set
Disable
Enable
Max Voltage Set
Max Volt=31.000V
Out Timer State Set
Disable
Enable
Max Voltage Set
Max Volt=6.000v
Out Timer State Set
Disable
Enable
Select serial connect mode
Connect CH1 and CH2 in serial
Select parallel connect mode
Connect CH1 and CH2 in parallel
Connect CH2 and CH3 in parallel
Connect three channels in parallel
Enable tracking function
Connect CH1 and CH2 in track
Connect CH2 and CH3 in track
Connect three channels in track
16