Menu Description - ITech IT6322A User Manual

Details about key buttons' state：
V-set V-set
I-set I-set
Recall
Meter Meter
On/Off

3.2 Menu Description

Press
menu on the VFD,and use the right/left key to change the setup, and up/down
key to scroll through the complete menu items. Press
selected menu function.Press
menu.When the item keeps filickering indicates it is selected currently.
Power Menu...
Config Configuration Menu
Configuration Menu...
Out State
Out Param
Knob
Buzzer
NOTE
If there is any operation on front panel within 5S, the cursor will disappear automatically. You
can also disable the cursor by pressing ESC button. When VFD displays cursor, you can modify
the parameters by adjusting knob or up/down keys, or move the cursor by right/left keys.
When button is lit, means you can set voltage.
When button keeps flickering, means in OVP setting mode.
When button is lit, means in current setting mode.
When button is lit, means in recall mode.
When button keeps flickering, means in save mode and waiting for
a number to be entered to specify the memory location.
When button is lit, means current VFD displays actual voltage and
current.
When button is lit, means at least one channel output is on. Or all
channels are in OFF mode.
NOTE
V-set V-set I-set I-set
Recall
, ,
I-set I-set
(Shift)+
Power Out State Set
Off
Keep
Power Out Param Set
Reset
Keep
Knob Function Set
Unlock
Lock
Power Key Beeper Set
Copyright © Itech Electronics Co., Ltd.
buttons will not be lit at the same time.
(Menu) to indicate operation mode.View the
Esc
button to return to the previous
Configuration Menu
Power supply power on output state Settings
all along OFF
Keep the last time state before the shutdown
Set up the related parameters when power on
default
Restore the last time parameters
Pulsating knob function Settings
Pulsating knob function open
Pulsating knob function closed
Key sound establishment
Function and Features
Enter
to enter the
14