ITech IT6322A User Manual page 17

Key Symbol Name & Function
0～9 Numeric keys. Use keys 1~3 to control the output state of the 3
channels which should coordinate with Shift key. Note: In key
lock mode, Shift key is not needed.
Esc
Escape from the current setting or menu item.
Compound key.
(Shift)
Used to switch to local operation mode.
(Local)
(Power)
Used to power on/off the DC source.
Used to set the voltage or shift+V-set to set OVP value.
V-set V-set
/OVP
I-set I-set
/Menu
Used to set the current or shift+I-set to enter the menu operation.
Recall
/Save
Save or recall different operating parameters in memory locations.
Meter Meter
Switch the display between setting value and actual value.
Enter button to confirm the selection.
Enter
On/Off
/Lock
Used to control the output state of all channels or Shift+On/Off to
lock the front keys.
Right/Left key, use to move the cursor or scroll through the menu
items.
Up/down key, used to increase or decrease the setting value.
Used to turn on the output of corresponding channel no matter in
(Shift)+1,
menu operation or Meter state.
(Shift)+2,
(Shift)+3
Copyright © Itech Electronics Co., Ltd.
Quick Start
8