Oki MC573 Advanced Manual page 336

Item Factory default setting
Network PS-Protocol RAW
USB PS-Protocol RAW
PDF Paper Size Current Tray Size
PDF Scaling Size 99%
PDF Print Mode High Quality
XPS Setup
Item Factory default setting
DigitalSignature OFF
DiscardControl Auto
MC Mode ON
Unzip Mode Speed
White Page Skip OFF
SIDM Setup
Item Factory default setting
SIDM Manual ID# 2
SIDM Manual2 ID# 3
SIDM MP Tray ID# 4
SIDM Tray1 ID# 1
Description
Specifies PS communication protocol SIDM Tray2 ID#
mode of data from Network. (Optional)
Specifies PS communication protocol
mode of data from USB. SIDM Tray3 ID#
(Optional)
Set the paper size when printing with
PDF Direct Print.
Sets reduction rate for PDF when
[PDF Paper Size] is set to [Scaling
IBM PPR Setup
Size].
Sets the priority order between the
print quality and print speed when
printing PDF.
Character Pitch
Font Condense
Character Set
Description
Symbol Set
Sets the DigitalSignature functions.
Letter O Style
Sets the DiscardControl function.
Sets the MarkupComaptibility Zero Character
function.
Sets the XPS file decompression Line Pitch
method.
White Page Skip
Selects whether to output blank pages
CR Function
in XPS.
LF Function
Line Length
Form Length
Description
TOF Position
Set up Pn specified in MANUAL by
MANUAL-1 ID No.FX/PPR Emu in
CSF control command (ESC EM Pn).
Left Margin
Set up Pn specified in MANUAL by
MANUAL-2 ID No.FX/PPR Emu in
CSF control command (ESC EM Pn).
Fit To Letter
Set up Pn specified TRAYO (MP Tray)
by MP Tray ID No.FX/PPR Emu in
CSF control command (ESC EM Pn).
Set up Pn specified TRAY 1 by Tray 1
ID No.FX/PPR Emu in CSF control
command (ESC EM Pn).
- 336 -
Item Factory default setting
5
6
Item Factory default setting
10 CPI
12CPI to 20CPI
SET-2
IBM-437
Disable
Normal
6 LPI
OFF
CR
LF
80 Column
11.7 inch or 11 inch
0.0 inch
0.0 inch
Disable or Enable
9. Operating Management/ Specifications
Description
Set up Pm specified TRAY 2 by Tray 2
ID No.FX/PPR Emu in CSF control
command (ESC EM Pn).
Set up Pn specified TRAY 3 by Tray 3
ID No.FX/PPR Emu in CSF control
command (ESC EM Pn).
Description
Specifies character pitches in IBM
PPR emulation.
Specifies 12CPI pitches for Condense
Mode.
Specifies a character set.
Specifies a symbol set.
Specifies the style that replaces 9BH
with letter o and 9DH with a zero.
Sets the zero to be slashed or
unslashed.
Specifies the line spacing.
Selects whether to print blank pages.
Selects a carriage return from [CR] or
[CR+LF].
Selects a line feed from [LF] or
[LF+CR].
Specifies the number of characters
per line.
Specifies the length of paper.
Specifies the distance from the top
edge of paper to where the cut is to be
made.
Specifies the distance from the left
edge of paper to where the cut is to be
made.
Sets the printing mode that can fit
paper to the printable area equivalent
to 11 inches (66 lines).