Factory Defaults - Oki MC573 Advanced Manual

Item Factory default setting
Gigabit Network Disable
HUB Link Setting Auto
• Wireless (Infrastructure) Setting (If wireless LAN module fitted)
Item
Wireless(Infrastructure)
Network Setting IP Address Set Auto
IPv4 Address
Subnet Mask
Gateway
Address
DHCPv6
WPS WPS-PBC
WPS-PIN
Wireless A list of access point name found
Network in the search
Selection
Manual Setup SSID
Security
WEP Key
WPA
Encryption
Type
WPA Pre-
shared Key
Wireless reconnection
Description
Sets whether to enable access with Gigabit
Ethernet.
Sets the hub linking method. Normally, select
[Auto Negotiate].
Factory Description
default
setting
Disable Sets whether to enable
Wireless(Infrastructure).
Sets the method of assigning an IP address.
192.168.101.10 Sets an IP address.
0 This item is displayed when TCP/IP protocol
is enabled.
255.255.255.0 Sets a subnet mask.
This item is displayed when TCP/IP protocol
is enabled.
0.0.0.0 Sets a gateway address.
This item is displayed when TCP/IP protocol
is enabled.
Disable Specify whether to enable DHCP when using
IPv6.
- WPS-PBC is executed.
- WPS-PIN is executed.
- Displays a list of wireless LAN access points'
names that are found in a search.
(NULL) Enter an SSID.
Disable Selects the security of the wireless LAN
function.
"WPA-EAP" and "WPA2-EAP" can be set
only on the Web.
(NULL) Displays if [Security] is set to [WEP].
Enter the WEP key.
AES Select a WPA2-PSK encryption type.
Displays if [WPA-PSK] or [WPA2-PSK] is
selected for [Security].
(NULL) Enter the Pre-shared Key.
Displays if [WPA-PSK] or [WPA2-PSK] is
selected for [Security].
- Wireless(Infrastructure) reconnection is
executed.
• Wireless(AP Mode) Setting (If wireless LAN module fitted)
Item
Wireless(AP Mode)
Automatic connection (push-button)
Manual Setup SSID
Password
Connection Setting SSID
Password
IPv4 Address
AP Mode User Setting

• Factory Defaults

Item
Factory Defaults
Mail Server Setup
Item Factory default setting
SMTP Server (NULL)
SMTP Port 25
SMTP Encryption None
Receive Setting Disable
POP3 Server (NULL)
- 339 -
9. Operating Management/ Specifications
Factory default setting Description
Disable Sets whether to enable
Wireless(AP Mode).
- Connects automatically
(push button) using
Wireless(AP Mode).
(Device-specific string) Displays SSID of
Wireless(AP Mode).
(8-digit number) Displays the password of
Wireless(AP Mode).
(Device-specific string) Sets SSID of Wireless(AP
Mode).
(8-digit number) Sets the password of
Wireless(AP Mode).
192.168.110.100 Sets the password of
Wireless(AP Mode).
Don't disclose user Sets whether to open the
AP mode information to
other than the
administrator.
Factory default Description
setting
- The settings of the network, mail server,
LDAP server, and secure protocol server are
returned to the default settings.
Description
Sets the IP address or server name for the SMTP server.
Sets the port number for the SMTP server. Normally, use
the default setting.
Available range: 1 to 65535
Selects an encryption method in the SMTP
communication.
Sets the protocol to be used for receiving e-mails.
Sets the IP address or server name for the POP3 server.