Oki MC573 Advanced Manual page 171

Distant Station
Resolution
Start Time
Time
Page
Indicates destinations.
You can change the display style of [Distant Station] in the
[Distant Station Priority] setting of [Admin Setup] > [Fax
Setup] > [Other Settings].
When [Type 1] is set
• For the fax auto transmission/Fcode polling reception
The device information (phone number) registered in the
destination machine is displayed.
If the device information (phone number) is not
registered in the destination machine, the destination
information ("name" in the "speed dial" or phone
number) specified in the machine is displayed.
• For the manual transmission (on-hook dial)
The device information (phone number) registered in the
destination machine is displayed.
If the device information (phone number) is not
registered in the destination machine, the specified
destination (phone number) is displayed.
When [Type 2] is set
• For the fax auto transmission/Fcode polling reception
The destination information ("name" in the "speed dial"
or phone number) specified in the machine is displayed.
• For the manual transmission (on-hook dial)
The specified destination (phone number) is displayed.
*The display style of "Distant Station" cannot be changed
in case of the fax reception, manual transmission using
the external telephone, or Fcode polling transmission.
The device information (phone number) registered in the
destination machine is displayed.
If the device information (phone number) is not registered
in the destination machine, "Number Unknown" is
displayed.
Three types of Normal, Fine, Ext-Fine
Month/Day Hour:Minute
Minute' Second"
Number of pages
Kind
Result
Error Code
- 171 -
Tx History
Indicates the way of sending fax.
Manual Tx: A fax was sent after a telephone call made
from the external telephone was finished.
Secure Box Tx: A fax was sent to the confidential box of
the destination machine.
F-Code Polling Tx: A document saved in the bulletin board
box of the machine was sent as a fax.
Broadcast: A fax was sent to multiple destinations at the
same time.
PC-FAX: A fax was sent via the fax driver on a computer.
Forwarding: A received fax was forwarded to another fax
machine.
*A blank cell indicates communication other than those
categories (such as usual automatic transmission).
Rx History
Manual Rx: Receive a fax after answering with the
external telephone.
F-Code Polling Rx: A document saved in the bulletin
board box of the destination machine was received as a
fax.
Secure Box Rx: A fax sent to the confidential box of the
machine was received.
*A blank cell indicates communication other than those
categories (such as usual automatic reception).
Displays any of the following six states, "# OK", "* OK",
"OK", "# ERROR", "* ERROR", or "ERROR".
#: Communicates via Super G3.
*: Communicates via G3 ECM.
Non: Communicates via Non ECM.
Indicates the error code when a communication error
occurs.
For details about the error code, refer to "Fax Error Code".
A blank cell indicates that the communication is
successfully completed.
5. Fax