Oki MC573 Advanced Manual page 212

7
Select a reduction ratio.
8
Press [Back] until the home screen is displayed.
Specifying a Threshold Value
Threshold means the value that determines the starting points to reduce or cut off to fit on
page when the received image exceeds the effective recording size.
• If the excess is larger than the specified reduction threshold value, the excess is printed on the next page.
• If the excess is smaller than the specified reduction threshold value, the received image is reduced and printed on
a page.
• If [Rx Reduc. Rate] is set to [100%] and the excess from the paper size is smaller than the specified threshold value,
the excess is discarded.
1
Press [Device Settings] on the touch panel.
2
Press or several times and press [Admin Setup].
3
Enter the administrator name and password and press [OK].
The factory default administrator name and password are "admin" and "999999"
respectively.
4
Press [Fax Setup].
5
Press [Other Settings].
6
Press or several times and press [Reduc. Margin].
7
Enter a value between 0 and 100 (mm) (0.0 to 3.9 inches), and then press
[OK].
8
Press [Back] until the home screen is displayed.
- 212 -
5. Fax