Setting The Sender's Address; Setting The Reply Address - Oki MC573 Advanced Manual

Setting the Sender's Address

1
Press [Device Settings] on the touch panel.
2
Press or several times to select [Admin Setup].
3
Enter the administrator name and password and press [OK].
The factory default administrator name and password are "admin" and "999999"
respectively.
4
Press [Scanner Setup].
5
Press [E-mail Setup].
6
Press [From/Reply To].
7
Press [From].
8
Enter an e-mail address.
9
Press [OK].
10
Press [Back] until the top screen is displayed.

Setting the Reply Address

1
Press [Device Settings] on the touch panel.
2
Press or several times to select [Admin Setup].
3
Enter the administrator name and password and press [OK].
The factory default administrator name and password are "admin" and "999999"
respectively.
4
Press [Scanner Setup].
5
Press [E-mail Setup].
6
Press [From/Reply To].
7
Press [Reply To].
8
Specify a destination.
9
Press [Back] until the top screen is displayed.
- 87 -
3. Scan