Maintaining the Polycom RAS200A
Shutting Down the Server
Rebooting the Server
Note:
This chapter describes how to maintain the Polycom RAS200A server.
If you need to shut down the Polycom RAS200A system, turn off the power
with the button on the front panel or use remote access to shut down the server
gracefully.
You can reboot the server.
You should only restart the server when a fatal error has occurred.
To restart the server
1.
Go to System Settings > Maintenance.
The Maintenance screen appears.
Figure 3-1
Maintenance Screen
3
3 - 1