Setting Up Mgc Devices - Polycom 3725-18101-001B Administrator's Manual

Administrator's Guide

Setting up MGC Devices

Note:
2 - 6
In this screen, you specify the following information:
Item
System Name
IP Address
Subnet Mask
Default Gateway
DNS Server
Current Date
Current Time
System Time Zone
Auto adjust for daylight savings
To monitor and manage MGC devices, you must add them to the Polycom
RAS200A server.
To add MGC devices
1. Go to Directory Setup > Devices.
The List of MGC Devices screen appears. In this screen, you can add,
change, delete, and update the status of MGC devices.
The Polycom RAS200A only lists MGC devices that have registered
with it. You manually register the MGCs by adding them to the List of
MGC Devices screen.
Description
Defines the NetBIOS name of the Windows
server. Must be between 6 and 16 characters
long; dashes and underscores are valid
characters.
Defines the static IP address of the server.
Defines the network's subnet mask for the
server's IP address.
Defines the static IP address of the server's
gateway.
Defines the static IP address of the DNS server.
Specifies the current system date of the
Polycom RAS200A. If you change the date, the
system date of the Polycom RAS200A also
changes.
Specifies the current system time of the
Polycom RAS200A. If you change the time, the
system time of the Polycom RAS200A also
changes.
Specifies the time zone in which the system
resides.
Select this check box to adjust the clock
automatically for daylight savings time.