Speed Dialling; Using D O Not Disturb (Dnd); Voice Mail - Polycom IP 450 User Manual

When call forwarding has been completed successfully, a call forward icon
number to whom the call has been forwarded to, will appear on your phone display (the icon may
appear with up to 30 seconds delay)
S D
PEED IALLING
To quickly dial a contact, use the contact's speed dial index number, or press the contact's speed
dial key
Using a speed dial index number:
Press the Up arrow
•
To add or edit a speed dial index number for a contact see the section Updating Contact Directory
Using a speed dial key:
press the contact's speed dial key (line key) on the top-right of the phone
•
To assign a speed dial key, press and hold an unassigned line key. Then enter the contact
information and press the soft key
U D N D (DND)
SING O OT ISTURB
To enable/disable Do Not Disturb (DND)
press the soft key
•
or
press
•
If multiple lines are configured on your phone, DND can be enabled just on selected lines or on all
lines:
press DND (to enable or disable DND on all lines)
•
to enable on a single line, select the line (using the arrow keys), press the
•
then press Activate
When DND is enabled,
forwarded to the Voicemail, or to the number set as "Call Forwarding on Busy" (this setting is
accessible from the WEB only).
Note: if the phone is reset, all DND settings are disabled.
By using the first mode, DND will be enabled on all lines. The second mode must by used if you
wish to enable on just one or more selected lines.
V M
OICE AIL
A voicemail icon on the phone screen
the normal dial tone indicate one or more new voice mail messages
e.g.: (1/3)  you have 3 messages, one is a new message
Go to Table of Content
, and then enter the contact's speed dial index number
Save
DND
→ 1. Features... → 1. Do Not Disturb...
or Deactivate
flashes on the screen and the line appears engaged. If enabled, calls are
, a flashing red line key, and a stutter dial tone in place of
, followed by the
soft key
Select
7 / 11