Routing Configuration - Tasman Networks 1002 Installation Manual

Routing Configuration

Router/configure/ interface/bundle Rome# encapsulation fr
Router/configure/ interface/bundle Rome# fr
Router/configure/ interface/bundle Rome/fr# intf_type dce
Router/configure/ interface/bundle Rome/fr# lmi
Router/configure/ interface/bundle Rome/fr/lmi# keepalive 12
Router/configure/ interface/bundle Rome/fr/lmi# exit
Router/configure/ interface/bundle Rome/fr# pvc 16
Router/configure/ interface/bundle Rome/fr/pvc 16# shaping cir 2048000
Router/configure/ interface/bundle Rome/fr/pvc 16# exit
Router/configure/ interface/bundle Rome/fr# enable interface
Router/configure/ interface/bundle Rome/fr# exit 4
Tasman products support RIP, OSPF, and BGP4 routing protocols.
RIP
Configuring RIP for Ethernet 0 and WAN 1 interfaces.
Router# configure terminal
Router/configure# router rip
Router/configure/router rip# interface ethernet0
Router/configure/router rip/interface ethernet0# exit
Router/configure/router rip# interface wan1
Router/configure/router rip/interface wan1# exit 3
OSPF
Configuring OSPF between a LAN and a WAN over multiple CT3 links running MLPPP.
Router# configure terminal
Router/configure# interface ethernet 0
Router/configure/interface/ethernet 0# ip address 10.10.10.1 24
Router/configure/interface/ethernet 0# exit 2
Router/configure# interface bundle Dallas
Router/configure/interface/bundle Dallas# link ct3 1 1-10
Router/configure/interface/bundle Dallas# encapsulation ppp
Router/configure/interface/bundle Dallas# ip address 20.20.20.1 24
Router/configure/interface/bundle Dallas# exit 2
Router/configure# router routerid 10.10.10.1
Router/configure# router ospf
Router/configure/router/ospf# area 760
Router/configure/router/ospf/area 760# exit
Router/configure/router/ospf# interface Dallas area_id 760
Router/configure/router/ospf/interface Dallas# cost 10
Router/configure/router/ospf/interface Dallas# exit
Router/configure/router/ospf# interface ethernet0 area_id 760
Router/configure/router/ospf/interface ethernet0# cost 10
Router/configure/router/ospf/interface ethernet0# priority 0
Router/configure/router/ospf/interface ethernet0# exit 3
Installation Guide: 1002 and 1004 Routers
55
TiOS 8.0