Led Descriptions - Tasman Networks 1002 Installation Manual

Table 4 LED Descriptions (continued)
Port Description
HS Indicates traffic speed
on the interface
DUP Indicates the type of
duplex mode
Power Indicates system power
status
Connector Description
WAN 1 - WAN 2 WAN connection ports. These ports accept cables with RJ-48C
connectors.
FE 0 / 1 Ethernet LAN connection ports. These ports accept cables with RJ-45
cable connectors.
AUX Reverse telnet connection. This port accepts a cable with a male DB-9
connector.
Console Console management port. This port accepts a cable with an RJ-45 cable
connector.
DC power 12 VDC power connection. This port accepts the 2 mm. power connector
on the DC power supply cable that ships with the 1002 router.
Color
Off = 10 Mbps
Green = 100 Mbps
Off = Half duplex
Green = Full duplex
Green = power on
Off = power off
Table 5 1002 Back-Panel Ports
Installation Guide: 1002 and 1004 Routers
19
TiOS 8.0