1004 Front Panel; 1004 Back Panel; Leds - Tasman Networks 1002 Installation Manual

1004

1004 Front Panel

WAN Port

LEDs 1-4

1004 Back Panel

WAN Ports 1 - 4
LEDs
The router front panel houses the system LEDs.
The following section identifies and describes the 1004 router network ports and LEDs.
Figure 3 1004 Router Front Panel
LINK/ACT HS
DUP LINK/ACT HS
Ethernet 0 LEDs
The 1004 router back panel provides connections for four WAN ports, two 10/100 Base-T
Ethernet ports, one AUX port, one Console port, and a 12 VDC power input jack.
Figure 4 1004 Router Back Panel
Fast Ethernet
Port 0
The 1004 front-panel LEDs indicate real-time unit status. Table 6provides information about
how to interpret the LED states.
Table 6 LED Descriptions
Port Description
WAN STATUS 1-4 Indicates traffic activity on
this interface
ETHERNET 0/1
LINK/ACT Indicates traffic activity on
this interface
DUP
Ethernet 1 LEDs
Fast Ethernet AUX Port
Port 1
Color
Green = normal activity
Red = alarm state
Yellow = test mode
Green = link is operational
Blinking Yellow = either receiving or sending
traffic
Red = packet collisions
Power LED
Console 12 VDC
Port Input Jack