Port Upgrade/Activation - Tasman Networks 1002 Installation Manual

44
CHAPTER 4
Configuration

Port Upgrade/Activation

Installation Guide: 1002 and 1004 Routers
TiOS 8.0
The Tasman Networks Model 1002 and Model 1004 router base system ships with one active
WAN port. Activating additional ports requires only a simple change to the router configuration
with a software key that may be purchased to activate up to three additional WAN ports. This
key is different than the software upgrade key.
To obtain a port upgrade key, contact your reseller or Tasman Networks. You will be asked to
provide the serial number, model number, and the number of ports that are currently active on
your router.
The following procedure describes how to activate additional WAN ports in the Model 1002 and
Model 1004 router.
From the command line interface, issue the following command:
1
Tasman# configure terminal
Issue the following command:
2
Tasman# system licenses < option >
The option parameters are:
enable_1_port
■
enable_2_ports
■
You will be prompted for the port upgrade license key.
Enter the license key provided.
3
The license key is case sensitive.
Reboot the router.
4
Port Upgrade/Activation