Table of Contents
Advertisement
Changing Login Parameters
Password
Administrator Account
The System Administrator login consists of two components: the user name and the password.
The initial login name is always tasman, but you can change this to suit your needs after
logging in for the first time. The default password for user tasman, tasmannet, should be
changed as soon as possible to ensure only authorized access to the router.
For more information about command usage for T1 products, refer to the Command Reference
Guide: Domestic Products. For information about command usage for E1 products, refer to the
Command Reference Guide: International Products. These guides are available on the Tasman
Networks website: www.tasmannetworks.com.
This procedure enables the system administrator to change any or all user passwords, or any
user to change their password on the Model 1002 and Model 1004. The password must be 3-10
characters.
To change the password:
Access the password configuration mode.
1
example:
Tasman# password
The system prompts for the current user name.
Type tasman, and then press Return.
2
The system prompts for the old password.
Type tasmannet, and then press Return.
3
The system prompts for the new password.
Type your new password, and then press Return.
4
The system prompts you to verify the new password.
Type the new password again and then press Return.
5
A message is appears confirming that the password has been changed.
This procedure changes the administrator login name (Level 1 access) to a user-specified
name. The default is tasman.
To change the account name:
Access the configure mode.
1
example:
Tasman#
configure term
Change the account name.
2
example:
Tasman/configure#
admin_name Greg
This example above changes the Level 1 user name to Greg.
The system displays a confirming message: "Administrator account name changed to Greg."
NOTE:
Changing the administrator login name does not change the administrator's password. Use the
password procedure to change the password.
Installation Guide: 1002 and 1004 Routers
37
TiOS 8.0
Advertisement
Table of Contents
