Wall-Mounting Option - Tasman Networks 1002 Installation Manual

26
CHAPTER 3
Installation

Wall-Mounting Option

Installation Guide: 1002 and 1004 Routers
TiOS 8.0
Inspect the Model 1002 and Model 1004 and the shipping carton for damage that may have
occurred during shipping. If you discover damage or that items are missing, contact Tasman
Networks Technical Support. Refer to the Tasman Networks website for contact information:
www.tasmannetworks.com.
An optional wall-mounting assembly is available for mounting the Model 1002 and Model 1004
router on a vertical surface. The wall-mount components are shipped in the same box with the
Model 1002 and Model 1004 router, and are shown in the following figure:
Figure 10 Wall-Mount Components
Power supply strap
Hollow wall anchors
Wall-mount bracket
Router to wall-mount bracket screws: (4) 4-40 x .250 inch
Phillips pan head
Wall-mount screws: (4) 6 x 1 inch Phillips pan head
Unpacking and Inspecting