Product Introduction; Overview - Tasman Networks 1002 Installation Manual

17
2
P I
RODUCT NTRODUCTION
This chapter provides information about the Tasman Networks Model 1002 and Model 1004
router front and back panels, LEDs, cable connection ports, and panel components.

Overview

This section describes front- and back-panel components of the Tasman Networks Model 1002
and Model 1004 router. Additional information is also provided in following sections about
external cables, wiring, and connection points.
The Tasman Networks Model 1002 and Model 1004 are designed to provide WAN-to-LAN
networking connectivity for branch office communication and primary Internet access for
medium-size businesses. The Model 1002 and Model 1004 are T1/E1 routers providing two to
four WAN ports, two 10/100 Fast Ethernet ports, an AUX port, and a local/remote
management Console port.
The routers may be purchased with 1 to 4 ports active. If all the WAN ports are not all
activated at the time of purchase then additional ports can be activated via a software license
key. Software licence keys may be purchased to activate additional WAN ports to allow
scalable bandwidth as your needs grow. Contact Tasman Networks sales (1-408-216-4700) for
more information.
Installation Guide: 1002 and 1004 Routers
TiOS 8.0