Polycom MGC-50 Getting Started Manual page 68

MGC-50/MGC-100 Getting Started Guide
3-44
Table 3-16: IP SPAN Options (Continued)
Field
IP Address
Communication
Mode
Host Name
Fixed Ports & NAT
H.323
Alias
Description
The IP address of the IP card installed in the MCU.
If the DHCP option is selected for this Network
Service, this field is disabled, and shows the address
0.0.0.0, as the IP address will be retrieved from the
DHCP.
Indicates the data transmission rate and duplex
mode. When set to Auto the system synchronizes
the data transmission rate according to the network.
You can also force the router to connect to the IP
card installed in the MCU
Full Duplex refers to the transmission of data in two
directions simultaneously.
Half Duplex refers to the transfer of data in only one
direction at a time.
The name of the computer on the domain network,
and that will be added to the local domain name to
identify the card by its host name, for example: IP1.
If the local domain name is polycom.com, the card
name will be IP1.polycom.com. A default host name
is suggested by the system.
Click this button to configure the firewall ports and
NAT traversal. For details on this option, see "Fixed
Ports & NAT Options" on page 3-46.
The alias by which the IP card is identified within the
network. An alias must be entered when working
with a gatekeeper. Up to five aliases can be defined
for each IP card.