Polycom MGC-50 Getting Started Manual page 64

MGC-50/MGC-100 Getting Started Guide
3-40
Table 3-15: SIP Settings Options (Continued)
Field
SIP Servers
Preferred SIP
Server
IP Address or
Name
Port
Domain Name or
IP
Alternate SIP
Server
IP Address or
Name
Port
Domain Name or
IP
Description
Select:
•
Off – No SIP server is used. Dial-out option is
available only when conference participants are
defined by their IP addresses.
•
Specify – to manually define the SIP server.
If you have selected Specify, enter either the IP
address of the preferred SIP server or its host name
(if a DNS server is used).
Enter the number of the TCP or UDP port used for
listening. The port number has to match the port
number configured in the SIP server. The default
port is 5060.
Conferences and Entry Queues can register to the
proxy using the format user@host. For example,
EQ1@polycom.com.
When dialing to a conference or Entry Queue, the
SIP server expects to receive the host either as
domain name or as an IP address.
Off – No SIP server will be used in case of failure of
the preferred SIP server.
Specify – Select this option to manually define the
SIP server that will be used as backup.
If you have selected Specify, enter either the IP
address or its domain name (if a DNS server is
used) of the Alternate SIP server.
Enter the number of the TCP or UDP port used for
listening, as for the Preferred SIP Server.
Same as for the Preferred SIP Server.