Polycom MGC-50 Getting Started Manual page 51

Table 3-8: Add Router Options (Continued)
Field
Type
c. Click OK.
The system returns to the Settings dialog box, displaying the added
static route.
Defining Quality of Service
7. To define Quality of Service parameters:
a. Click the Quality of Service button.
The QoS of Ethernet Service dialog box opens.
b. Define the following fields:
Table 3-9: QoS of Ethernet Service Options
Field
Enable
Chapter 3 - Initial System Configuration
Description
Select the type of router connection:
Network – defines a connection to a router segment
in another network.
Host – defines a direct connection to an endpoint
found on another network.
Description
Select the Enable check box to implement QoS for
IP packets.
When cleared, QoS is not implemented.
3-27