Polycom MGC-50 Getting Started Manual page 62

Polycom network hardware user manual
Hide thumbs Also See for MGC-50:
Table of Contents

Advertisement

MGC-50/MGC-100 Getting Started Guide
3-38
Table 3-13: SIP Options (Continued)
Field
Register OnGoing
Conferences/
Meeting Rooms/
Entry Queues &
SIP Factories
Refresh SIP
Registrations
Every n Seconds
The following table lists the supported SIP Proxies and their Registration
modes:
Table 3-14: Supported SIP Proxies and their Registration Modes
SIP Proxy
Microsoft LCS
2003/2005
Cisco
Alcatel
Description
Select the conferencing entity to register with the
proxy.
In SIP conferencing, the Entry Queues, Meeting
Rooms and conferences register with the SIP proxy.
The endpoint calls the conferencing entity directly
and not the card.
Registering all the conferences with the proxy loads
the proxy and the MCU as the registration is
refreshed constantly (every x seconds). Therefore, it
recommended to register only the Entry Queues and
define all the conferences and Meeting Rooms as
Entry Queue Access.
Reservations are not registered.
Enter the frequency in which the system informs the
SIP proxy that it is active by re-sending the details of
all conference types to the server. If the various
conferences and Entry Queues do not register within
the defined time interval, the SIP server will not refer
calls to this conference/Entry Queue until it
re-registers. If timeout is set to 0, re-registration is
disabled.
The default value is 3600 seconds (60 minutes).
Registration Mode
Redirect
Forking
Redirect
Redirect
Forking
Comment
Each IP card must be
configured in the Static
Routes table of the LCS.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mgc-100

Table of Contents