Polycom MGC-50 Getting Started Manual page 35

6. In the Settings dialog box, define the following parameters:
Table 3-1: Settings Dialog Box Options
Field
Net Service Name
Span Type
Service Type
NFAS
7. Click Next.
The PRI Settings dialog box opens.
Chapter 3 - Initial System Configuration
Description
Enter a unique name using up to 20 characters to
identify the Network Service. The Service
Provider's name can be used.
Select the span type from the drop-down list; select
either T1 (usually in the U.S.), or E1 (usually in
Europe).
Select PRI (Primary Rate Interface) for all ISDN
lines that are not leased lines. To define ISDN
Leased Lines service, refer to the MGC
Administrator's Guide, Chapter 3.
To define an ISDN NFAS Service, refer to the MGC
Administrator's Guide, Chapter 3.
3-11