Polycom MGC-50 Getting Started Manual page 54

MGC-50/MGC-100 Getting Started Guide
3-30
9. Define the following parameters:
Table 3-10: DNS Settings Options
Field
Use DNS Servers
DNS Server Addresses
Primary DNS
Server IP Address
Secondary/Tertiary
DNS Server IP
Address
DNS Name
Local Domain
Name
10. Click Next.
Description
Select:
•
Off – DNS servers are not used in the network.
•
Specify – to manually set the IP address of the
DNS servers.
•
Auto – to automatically detect the DNS IP
address, if the DNS Server is defined in the
DHCP and the DHCP -obtain IP Address
Automatically option was selected in the Settings
tab.
If Specify was selected, this field is mandatory. Enter
the IP address of the primary DNS server.
If Specify was selected, enter the IP address(es) of
the next DNS server in line to resolve domain names
as a fallback for the primary DNS server.
These fields are optional.
Enter the domain name where the MCU is installed.
The name of the domain includes the host part of
URL or URI, for example, polycom.com.