Polycom MGC-50 Getting Started Manual page 37

10. To add or modify the sub-service, in the Sub Service dialog box define
the following parameters:
Table 3-3: Sub Service Dialog Box Options
Field
Name
Dial-out Prefix
Information
Element
Net Specific
Backup Dial-Out
11. Click OK.
The Sub Service dialog box closes and you are returned to the PRI
Settings dialog box (step 9) where you click Next to continue.
Chapter 3 - Initial System Configuration
Description
Type the name of the sub-service using up to 20
characters. This name identifies the sub-service.
Type the prefix that your PBX needs to dial out in
order to use this service program. Leave this field
blank if a dial-out prefix is not required.
For future release.
Select the desired service program from the
drop-down list. If no special specification is
required, select the NULL option.
For future release.
3-13