Front Brake Disc - VESPA GTS Super 300 ie 2008 Service Station Manual

Vespa GTS Super 300 ie (2008)
N.B.
SO AS NOT TO GET A DISTORTED READING, CAUSE THE DRIVEN PULLEY SHAFT TO TURN
IN ORDER TO ROTATE THE DISC.
Specific tooling
020335Y Magnetic mounting for dial gauge
Characteristic
Max. deviation allowed:
0.1 mm
- If you detect incorrect values, replace the disc. If
the anomaly persists, replace the hub.

Front brake disc

Removal
- Remove the front wheel
- Remove the front brake calliper
- Remove the hub and the disc operating on the
wheel axle nut
- Hold the hub and the disc firmly and remove the
brake disc undoing the six screws indicated in the
photograph
Braking system
BRAK SYS - 245