VESPA GTS Super 300 ie 2008 Service Station Manual page 265

Vespa GTS Super 300 ie (2008)
Knee-guard
- Remove the rear handlebar cover.
- Remove the two screws indicated in the photo-
graph and located on the shield under the grille
- Remove the expansion tank cover and then its
cap
- Remove the central screw inside the glove-box,
indicated in the photograph
- Remove the two screws indicated in the photo-
graph and located below the expansion tank cover
and the left cover respectively
- Remove the shield back plate lower screws, to
the right and left side of the shield back plate, as
indicated in the photograph
Chassis
CHAS - 265