Lubrication Circuit - VESPA GTS Super 300 ie 2008 Service Station Manual

Vespa GTS Super 300 ie (2008)
By working on two fitted cylinder head fixing nuts,
nut and lock nut, as shown in the picture, remove
the stud bolt from its seat.
Clean the threaded seat on the carter thoroughly.
Refit a new stud bolt and apply the special product
on the threading crankcase side.
Tighten up to the depth of the driving indicated.
Recommended products
Loctite Quick Set Loctite 270 high strength
threadlock
Loctite 270 high strength threadlock
Lubrication
Conceptual diagrams

LUBRICATION CIRCUIT

Engine
ENG - 169