Rear-View Mirrors; Front Disc Brake - VESPA LX 150 i.e. Manual

Rear-view mirrors (04_42)

To adjust the stem position, lift the rubber protection and loosen nut «A» using an
open wrench (opening 13 mm); orientate the stem in the desired position and tighen
the screw again. The rearview mirror is mounted on the stem by a ball joint «B». The
mirror can be adjusted moving it by hand to the desired position.
04_42

Front disc brake (04_43)

Wear of the disc and brake pads is automatically corrected so there will be no effect
on braking efficiency. The brakes therefore require no adjustment. A spongy feel when
you pull the lever probably means you have air in the circuit or the brake is malfunc-
tioning. In these cases, keep in mind the importance of your brakes in terms of road
safety, we recommend to bring the scooter to an Authorized Piaggio Service Centre.
He will have the equipment and knowledge to ensure that the front brake is working
perfectly.
04_43
WARNING: CHECK THE BRAKE PADS AFTER THE FIRST 1.000 KM AND EVERY
6.000 KM THEREAFTER. IF THE THICKNESS OF ONE OR BOTH PADS IS IN THE
REGION OF 1.5 MM, BOTH PADS MUST BE CHANGED. THIS OPERATION
SHOULD BE CARRIED OUT BY AN AUTHORIZED PIAGGIO SERVICE CENTER.
FIT ONLY GENUINE ORIGINAL PIAGGIO REPLACEMENT PADS. NON GENUINE
PADS MIGHT NOT WORK PERFECTLY RESULTING TO BRAKE FAILURES AND
A SERIOUS RISK OF INJURIES OR EVEN DEATH.
79