VESPA GTS Super 300 ie 2008 Service Station Manual page 117

Vespa GTS Super 300 ie (2008)
- Remove the lambda probe from the manifold.
CAUTION: SHOULD IT BE NECESSARY TO REMOVE ONLY THE SILENCER TIP, ALWAYS RE-
PLACE THE GRAPHITE GASKET BETWEEN STUB AND TIP.
Removal of the engine from the vehicle
CAUTION
SUPPORT THE VEHICLE ADEQUATELY.
- Disconnect the battery.
- Remove the helmet compartment.
- Remove the side fairings and the spoiler termi-
nals.
- Remove the rear brake calliper
- Remove the air cleaner from the housing by un-
screwing the three screws indicated in the photo-
graph.
CAUTION
THIS OPERATION MUST BE CARRIED OUT WHEN THE
ENGINE IS COLD.
- Remove the clamp from the blow-by pipe and
take the pipe out; remove the retainer clamp.
- Remove the clamp indicated in the photograph
and disconnect the sleeve connecting it to the
throttle body.
Engine from vehicle
ENG VE - 117