VESPA GTS Super 300 ie 2008 Service Station Manual page 14

Characteristics
- Presence of battery voltage between pins 22 and
26 of the interface cable harness upon
shifting to ON and for 2 sec.
STATOR
Power: 450 W
Resistance between terminals: 0.2 - 1 Ohm
terminal insulation from ground
Frame and suspensions
Specification
Front suspension
Front shock absorber axial travel
Rear suspension
Rear shock absorber axial travel
Brakes
Specification
CHAR - 14
CHASSIS AND SUSPENSIONS
Type
BRAKES
Front
Rear
Vespa GTS Super 300 ie (2008)
Desc./Quantity
Unitised body made of stamped plate
Single arm suspension (cantilever wheel) fitted with a double-
acting hydraulic shock absorber with coaxial spring
86.5 mm
Engine with swinging fork articulated to frame by means of an
arm with 2 degrees of freedom Pair of double-acting hydraulic
shock absorbers and coaxial springs with preloading adjust-
ment in 4 positions.
89.5 mm
Desc./Quantity
Ø 220 disc brake and floating calliper with Ø 25 mm twin plung-
ers and hydraulic control (lever on the far right end of the
handlebar)
Ø 220 disc brake and calliper with two Ø 30 mm counteracting
plungers and hydraulic control (lever on the far left end of the
handlebar)