VESPA GTS Super 300 ie 2008 Service Station Manual page 66

Electrical system
27. Voltage regulator - Remove the shield back
plate to reach it.
28. Magneto flywheel - Remove the flywheel cov-
er, as described in the «Engine» chapter, to reach
it. To get access to the connectors, remove the
helmet compartment.
40. Key switch contacts - Remove the shield
back plate to reach them.
33. Saddle-opening actuator - Remove the hel-
met compartment to reach it, undo the two screws
indicated and remove the fixing bracket together
with the actuator.
ELE SYS - 66
Vespa GTS Super 300 ie (2008)