Cisco RV315W Administration Manual page 48

Port Management
Configuring Wireless Settings
Cisco RV315W Broadband Wireless VPN Router Administration Guide
• SSID Broadcast: Check to enable SSID broadcast and broadcast the SSID
in its beacon frames. All wireless devices within range are able to see the
SSID when they scan for available networks. Uncheck to prevent auto-
detection of the SSID. In this case, users must know the SSID to set up a
wireless connection to this SSID.
• Allow Remote Management: Check to allow you to remotely access the
RV315W through the wireless network and configure the settings of the
RV315W.
• User Limit: Specify the maximum number of users that can simultaneously
connect to this SSID. Enter a value in the range of 0 to 30. The default value
is zero (0), which indicates that there is no limit for this SSID.
• Security Mode: Select one of the following security modes for the wireless
network and configure the corresponding security settings. For security
purposes, we strongly recommend that you use WPA2 for wireless security.
Security Configuration
Mode
Open Any wireless device that is in range can connect to the SSID.
This is the default setting but not recommended.
4
45