Wan Connection; 3G Wireless Connection - Cisco RV315W Administration Manual

Viewing System Status

WAN Connection

WAN Connection

3G Wireless Connection

STEP 1
Cisco RV315W Broadband Wireless VPN Router Administration Guide
The WAN Connection area displays the following information:
• WANx Connection Status: Shows if the WAN interface or the WAN
subinterface is active or inactive for routing.
• WAN Connection Name: WAN connection name through a WAN interface
or a WAN subinterface.
• IP address: IP address of the WAN interface or the WAN subinterface.
The 3G Wireless Connection area displays the following information:
• 3G Wireless Network: Displays whether the RV315W is connected to a 3G
wireless network or not.
• 3G Modem Status: Displays whether a 3G USB dongle is detected or not.
The 3G USB dongle should be inserted into the 3G USB port on the back
panel.
• UIM Card Status: Displays whether the UIM card is detected or not. The
UIM card should be inserted into the 3G USB dongle.
• Signal Strength: Current 3G wireless signal strength if the RV315W is
connected to a 3G wireless network.
To see complete details of the 3G wireless connection:
Click More. The following information is displayed:
• 3G Modem Information:
- 3G Modem Status: Displays whether the RV315W is connected to a 3G
wireless network or not.
- Device Model: Model number of the detected 3G USB dongle.
- Manufacturer: Manufacturer name of the detected 3G USB dongle.
- Network Access License: Identification number of the network access
certificate.
3
29