Deleting A Local User; Restoring Factory Default Settings - Cisco RV315W Administration Manual

System Management

Restoring Factory Default Settings

STEP 4
STEP 1
STEP 2
STEP 3
Restoring Factory Default Settings
!
CAUTION
!
CAUTION
Cisco RV315W Broadband Wireless VPN Router Administration Guide
Click OK to save your settings.

Deleting a Local User

The system administrator can remove a new added local user from the local user
database.
To delete a local user:
Click System Management > User Management. The User Management page
opens.
In the Local User List area, check the corresponding user and click Delete.
Click OK to delete it from the local user database.
To restore the RV315W to the factory default settings, you can press and hold the
RESET button on the back panel for more than 5 seconds, or perform the Reset to
Factory Defaults operation from web-based Configuration Utility.
During restoring to factory defaults, do NOT turn off the device, shut down the PC,
remove the cable, or interrupt the process in any way until the operation is
complete. This process should take several minutes including the reboot process.
The Reset To Factory Defaults operation will wipe out the current settings used on
the RV315W. We recommend that you back up your current settings before
restoring the RV315W to the factory default settings.
9
88