Configuring Alg - Cisco RV315W Administration Manual

Networking

Configuring ALG

STEP 4
STEP 5
Configuring ALG
STEP 1
STEP 2
STEP 3
Cisco RV315W Broadband Wireless VPN Router Administration Guide
• Service Provider: Specify the provider for your DDNS service. You can
choose either DynDNS.org or TZO.
• Domain Name: Enter the complete domain name of the DDNS service.
• Username: Enter the username of the account that you registered in the
DDNS provider.
• Password: Enter the password of the account that you registered in the
DDNS provider.
Click OK to save your settings.
To edit a DDNS service, select the corresponding DDNS service and click the Edit
icon. To delete a DDNS service, select the corresponding DDNS service and click
the Delete icon.
The RV315W can function as an Application Level Gateway (ALG) to allow certain
NAT incompatible applications (such as SIP or H.323) to operate properly through
the RV315W.
To configure ALG:
Click Networking > ALG. The ALG page opens.
Check the box of a protocol to enable the ALG support. The RV315W supports
ALG for GRE, SIP, H.323, IPSEC, L2TP, RTSP and NAT Passthrough.
Click OK to save your settings.
5
54