Configuring Wireless Connection - Cisco RV315W Administration Manual

Using the Setup Wizard

Configuring Wireless Connection

Configuring Wireless Connection
STEP 9
Cisco RV315W Broadband Wireless VPN Router Administration Guide
From the Wireless Configuration page you can configure the wireless network of
the RV315W and the security settings for the selected SSID.
Enter the following information:
• Current SSID: Select a SSID as the default wireless access point of the
RV315W.
• SSID Name: Displays the name of the selected SSID. You can edit the SSID
name. Enter a unique name for the SSID for identification.
• Enable Current SSID: Check Enable to enable this SSID, or check Disable
to disable the SSID.
• Security Mode: Choose the security mode and configure the
corresponding security settings. For security purposes, we strongly
recommend that you use WPA2 for wireless security. The following table
lists all available security modes:
Security Mode Configuration
Open Any wireless device that is in range can connect to the SSID.
This is the default setting but not recommended.
2
22