Completing The Setup Wizard - Cisco RV315W Administration Manual

Using the Setup Wizard

Completing the Setup Wizard

STEP 10
Completing the Setup Wizard
STEP 11
STEP 12
Cisco RV315W Broadband Wireless VPN Router Administration Guide
Security Mode Configuration
WPA2- WPA2-Enterprise uses WPA2 with RADIUS authentication.
Enterprise This mode always uses AES encryption mechanism for data
encryption and requires the use of a RADIUS server to
authenticate users.
If you choose this option, enter the following information:
If you want to continue, click Next to proceed to the Complete Setup Wizard page.
If you want to return to the previous page, click Back. If you want to exit the Setup
Wizard, click Exit.
From the Complete Setup Wizard page you can see the summary information for
all configurations.
If you want to return to the previous page, click Back. If you want to exit the Setup
Wizard, click Exit.
If the configuration is correct, click Finish to apply the settings and complete the
Setup Wizard configuration.
• WPA Key Renewal Timeout: Enter a value to set the
interval at which the key is refreshed for clients
associated to this SSID. A value of zero (0) indicates
that the key is not refreshed. The default value is 3600
seconds.
• WPA Encryption: Choose TKIP, AES, or TKIP+AES as
the encryption algorithm for data encryption. The
default is AES.
• RADIUS Server IP Address: Enter the IP address of
the RADIUS server.
• RADIUS Server Port: Enter the port number of the
primary RADIUS server. The default value is 1812.
• RADIUS Server Key: Enter the key for authentication
used by the RADIUS server and the RV315W.
2
27