Configuring Ipsec Vpn Policies; Setting Up A Site-To-Site Vpn - Cisco RV315W Administration Manual

VPN

Configuring IPsec VPN Policies

STEP 2
STEP 3
Configuring IPsec VPN Policies
Cisco RV315W Broadband Wireless VPN Router Administration Guide
- site-to-site VPN: Allows you to set up a secure VPN tunnel between the
RV315W and a remote VPN router.
- pc-to-site VPN: Allows you to set up a secure VPN tunnel between the
RV315W and a remote PC that installs a third-party client software.
• Remote Gateway Address/Hostname: Displays the hostname or IP
address of the remote network.
- For a site-to-site VPN, the hostname or IP address of the remote gateway
is displayed.
- For a pc-to-site VPN, the hostname or IP address of the remote PC is
displayed. Separate multiple IP addresses with commas (,).
• Local Gateway Address: Displays the IP address of the local network.
• Authentication Method: Displays the authentication method.
• Connection Status: Displays whether the IPsec VPN tunnel is connected or
disconnected.
To edit the settings of an IPsec VPN policy, select the corresponding policy and
click the Edit icon. See
To delete an IPsec VPN policy, select the corresponding policy and click the
Delete icon.
An IPsec VPN policy is used to establish a VPN connection between two peers.
The RV315W allows you to configure up to 50 IPsec VPN policies.

Setting Up a Site-to-Site VPN

A site-to-site VPN policy is used to create a new tunnel between two VPN
devices, such as a Cisco RV315W router at your office and a Cisco RV315W
router at a remote office.
Configuring IPsec VPN Policies.
6
67