SMC Networks EX600-HT1A Operation Manual page 49

Password Change
1. Select [Password Change] and press the
2. Input the current password.
Select the digit to be set with the
Select the words with the
Every time the button is pressed, the value changes from A to
Z and 0 to 9.
When the button is pressed, the value changes in the opposite
direction.
: If the password does not match, "wrong password" is displayed on the input
screen. In that case, enter the correct password again.
3. Enter a new password.
The method of entering the password is the same as above.
4. Press the button.
A new password is set, and the screen is returned to the terminal
setting screen.
-48-
button.
and buttons.
and button.
No.EX※※-OML0011-C