SMC Networks EX600-HT1A Operation Manual page 36

3. Unit parameter setting
5. Press the button to complete the setting.
To copy the set value to units of the same type in the manifold, press the
6. Press the button.
Copy is completed, and the screen returns to the unit parameter selection screen.
1. Press the button on the parameter selection
screen. Or select the parameters where the [unit] in the
[object] is selected, and press the
2. Enter the password.
3. Select the parameter with the
press the button.
(Refer to Unit parameter setting for the details of setting.
(page 36 to 40))
4. Select the setting value with the
buttons and press the
-35-
button.
and buttons and
, , and
button.
button.
No.EX※※-OML0011-C