Electrolux EBM8000 Instruction Book page 17

Hide thumbs Also See for EBM8000:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 12
Troubleshooting
MACHINE MECHANICS
Problem
Bread maker not operating/Kneader not
moving.
Ingredients not mixed.
Burning odour noted during operation.
Machine unplugged by mistake or power lost
during use. How can I save the bread?
E:01 appears on display and machine cannot
be turned on.
H:HH & E:EE appears in display and machine
does not operate.
ELX12539_IFU_Baguette_bakmaskin_ELX_13lang.indd 17
Possible cause
Pan not correctly located.
Delay timer selected.
Did not start bread maker.
Pan not correctly locked in place.
Forgot to put kneader in pan or blade did not
stand up.
Ingredients spilled inside oven.
Pan leaks.
Exceeding capacity of bread pan.
If machine is in knead cycle, discard ingredients and start again.
If machine is in rise cycle, remove dough from bread pan, shape and place in greased 23 x
12.5cm/9 x 5 in. loaf tin, cover and allow to rise until doubled in size. Use bake only setting 13
or bake in pre-heated conventional oven at 200ºC/400ºF/Gas mark 6 for 30-35 minutes or until
golden brown.
If machine is in bake cycle, use bake only setting 13 or bake in pre-heated conventional oven at
200ºC/400ºF/Gas mark 6 and remove top rack. Carefully remove pan from machine and place on
bottom rack in oven. Bake until golden brown.
Baking compartment too hot.
Bread machine is malfunctioning. Temperature
sensor error.
Solution
Check the pan is locked in place.
Bread maker will not start until count down
reaches programme start time.
After programming control panel, press start
button to turn bread maker on.
Check pan is in accurate position.
Always make sure kneader is on shaft in the
bottom of the pan before adding ingredients.
Also make sure blade is completely clean.
Be careful not to spill ingredients when
adding to pan. Ingredients can burn on
heating unit and cause smoke.
See "Service and Customer care" section.
Do not use more ingredients than
recommended in recipe and always measure
ingredients accurately.
Unplug and allow to cool down for 30
minutes.
See "Service and Customer care" section.
2009-12-07 16:51:25
GB
f
I
E
P
S
NL
fI
N
RU
SK
CZ
HR
17

Advertisement

Table of Contents
loading

Table of Contents