Welcome to the growing group of value−conscious people who drive Toyotas. We are proud of the advanced engineering and
quality construction of each vehicle we build.
This Owner's Manual explains the operation of your new Toyota. Please read it thoroughly and have all the occupants
follow the instructions carefully. Doing so will help you enjoy many years of safe and trouble−free motoring. For
important information about this manual and your Toyota, read the following pages carefully.
When it comes to service, remember that your Toyota dealer knows your vehicle very well and is interested in your complete
satisfaction. Your Toyota dealer will provide quality maintenance and any other assistance you may require.
If there is not a Toyota dealer near you, please call the following number:
D
U.S. OWNERS:
When traveling in the U.S. mainland or Canada:
Toyota Customer Experience Center
D
Hawaii:
Servco Automotive Customer Services
D
CANADIAN OWNERS:
When traveling in Canada or the U.S. mainland:
Toyota Canada Customer Interaction Centre
Please leave this Owner's Manual in this vehicle at the time of resale. The next owner will need this information also.
All information and specifications in this manual are current at the time of printing. However, because of Toyota's policy of
continual product improvement, we reserve the right to make changes at any time without notice.
Please note that this manual applies to all models and explains all equipment, including options. Therefore, you may
find some explanations for equipment not installed on your vehicle.
Please access our websites for further information.
D
The U.S. mainland
www.toyota.com
D
Hawaii
www.toyotahawaii.com
D
Canada
www.toyota.ca
©
2005 TOYOTA MOTOR CORPORATION
All rights reserved. This material may not be reproduced or copied, in whole or in part, without the written permission of Toyota
Motor Corporation.
'06Camry_U (L/O 0507)
Foreword
Toll−free:1−800−331−4331
Toll−free:1−888−272−5515
Toll−free:1−888−TOYOTA−8 or 1−888−869−6828
i
2006 CAMRY from July '05 Prod. (OM33708U)
I n f o r ma t i o n P r o v i d e d b y :
Need help?
Do you have a question about the 2006 Camry and is the answer not in the manual?
Questions and answers
Battery jump start procedure. How to do it? 2006 CAMRY,
To jump start a 2006 Toyota Camry, follow these steps:
1. Check Connections: Ensure the jumper cable clamps are tight and do not touch any moving parts or other metal surfaces.
2. Connect Jumper Cables:
- Attach one end of the positive (+) jumper cable to the positive terminal of the dead battery.
- Connect the other end of the positive cable to the positive terminal of the working battery.
- Attach one end of the negative (-) jumper cable to the negative terminal of the working battery.
- Connect the other end of the negative cable to a solid, unpainted metal surface on the engine block of the dead vehicle (not the battery).
3. Charge the Battery: Allow the dead battery to charge for a few minutes with the jumper cables connected.
4. Start the Engine: Attempt to start the Camry's engine in the normal way.
5. Run the Engine: If the engine starts, keep it running at about 2000 RPM for several minutes with the accelerator pedal lightly pressed.
6. Disconnect Cables: Carefully remove the jumper cables in reverse order:
- Remove the negative cable from the previously dead vehicle.
- Remove the negative cable from the donor vehicle.
- Remove the positive cable from the donor vehicle.
- Remove the positive cable from the previously dead vehicle.
If the engine does not start after multiple attempts, the battery may need further charging or replacement. Have it checked by a Toyota dealer.
This answer is automatically generated
Battery jump start procedure?
The battery jump start procedure for a 2006 Toyota Camry is as follows:
1. Ensure the booster battery is in another vehicle and that the vehicles are not touching. Turn off all unnecessary lights and accessories.
2. Use a booster battery of matching or higher quality.
3. If jump-starting is difficult, charge the booster battery for several minutes.
4. If required, remove all vent plugs from both the booster and discharged batteries and lay a cloth over the open vents.
5. Make the cable connections in the following order:
- Connect the positive ("+") clamp to the positive terminal of the discharged battery.
- Connect the other end of the positive cable to the positive terminal of the booster battery.
- Connect the negative ("−") clamp to the negative terminal of the booster battery.
- Connect the other end of the negative cable to a solid, unpainted metal surface on the vehicle with the discharged battery, away from the battery itself.
This procedure helps safely jump-start the vehicle without causing damage to the electrical system.
This answer is automatically generated