Replacement Of The Synthetic Air Filter - Barco UDX 4K22 Installation Manual

7. Maintenance
7.4

Replacement of the synthetic air filter

W
ARNING
Necessary parts
New synthetic filter
How to remove
1. Remove the front cover. See "Removal of the front cover", page 90.
2. Push both filter holders to the outside and flip the filter out of the holder as illustrated.
Image 7-3
Remove old filter
3. Remove the filter and insert a new one.
Caution: Take notice of the air flow direction of the filter (made visible by a label). Make sure the arrow points towards the
inside of the projector.
4. Install the front cover. See "Mounting the front cover", page 94
C
AUTION
C
AUTION
88
:
Switch off the projector and unplug the power cord before starting the procedure.
:
Never clean the filter. Always replace with a new one.
:
Never use the projector with removed filters !
R5906113 UDX 07/07/2017