Lcd Panel - Barco UDX 4K22 Installation Manual

The projector remote control is a full feature wireless remote control, powered by two (2) standard AA batteries. The battery com-
partment is on the back side of the remote control.
The remote control is backlit for use in dark environments. It also has an XLR connector for wired connection to the projector. When
the wire is connected, the IR beam is switched off.

LCD panel

The LCD panel has two main functions:
1. Showing the menus and adjustment information. and also a mirror of the OSD, (On Screen Display) described in User Interface
when this is enabled.
2. Information regarding the status of the projector showing this data:
- Projector status
- Network address
- Active source
- Current firmware version
- Operation Data
- Active functions (Enabled Functions).
Toggle between the two indications by using the Menu button on the keypad, or on the remote control
The LCD Display will fade out 30 seconds after the last key operation.
R5906113 UDX 07/07/2017
6. Getting Started
71