2.4 Initial inspection
General
Before shipment, the projector was inspected and found to be free of mechanical and electrical defects. As soon as the projector is
unpacked, inspect for any damage that may have occurred in transit. Save all packing material until the inspection is completed. If
damage is found, file claim with carrier immediately. The Barco Sales and Service office should be notified as soon as possible.
Box content
After unpacking the projector it is recommended to check if all following items where included:
•
One power cords of 2.7 m (3G10, 32A)
•
One Quick Start guide
•
One Safety manual
•
One Web site reference sheet
•
One remote control unit (RCU)
•
2 batteries for the RCU.
Mechanical check
This check should confirm that there are no broken knobs or connectors, that the cabinet and panel surfaces are free of dents and
scratches, and that the operating panel is not scratched or cracked. The Barco Sales and Service office should be notified as soon
as possible if this is not the case.
R5906113 UDX 07/07/2017
2. Installation preparations
21