Getting Started - Barco UDX 4K22 Installation Manual

6. GETTING STARTED

How controlling the projector ?
The projector can be controlled by the local keypad, by the remote control unit or by browser application.
Location of the local keypad ?
The local keypad is located on the input side of the projector.
Remote control functions.
This remote control includes a battery powered infrared (IR) transmitter that allows the user to control the projector remotely. This
remote control is used for source selection, control, adaptation and set up.
Other functions of the remote control are :
• switching between stand by and operational mode.
• switching to "pause" (blanked picture, full power for immediate restarting)
• direct access to all connected sources.
Overview
• Functionality overview
• Power on projector
• Switching to standby
• Power off projector
• Using the RCU
• Projector Address
• Quick setup via Direct access
R5906113 UDX 07/07/2017
6. Getting Started
69