Switching To Standby - Barco UDX 4K22 Installation Manual

6. Getting Started
6.3

Switching to standby

How to switch to standby
1. Press and hold the Power on/off button for 3 seconds on the local keypad, or press the Power Off button on the remote control.
The projector goes to standby mode. The after-cooling cycle will start (about 30 seconds). During this period the Power on/off
button will blink. Once the after-cooling cycle has ended, the projector will be in standby mode and the Power on/off button will
be lit WHITE.
3 s
Image 6-4
74
30 s
R5906113 UDX 07/07/2017