Barco UDX 4K22 Installation Manual page 72

5. Input & Communication
Image 5-18
5. Insert the GSM module with antenna wire into the connector (5). Push the other side of the module down until it clicks so that
the module is secured (6).
Image 5-19
6. Push the antenna connector through the hole in the front plate and secure the antenna wire by installing the lock washer and nut
(7).
Image 5-20
7. Install the antenna by screwing it on its base (8).
8. Stick the FCC & IC label on the front panel of the Communication module near to the antenna.
9. Reinsert the communication board.
68
4
6
5
7
8
R5906113 UDX 07/07/2017